3 Channel Device Controller Sequencer Arduino based Custom programmable board AC

Description: Arduino BASED on ATMEGA8 chip, SSR 3 Channel Title: Programmable Light Controller Controller - Arduino Based on ATMEGA8 chip, Universal, 3 Channels Description: If you seek a complete and limitless solution for your Light Controllers, our device offers you precise control over your Light Controllering configuration. With a requirement for basic ARDUINO programming knowledge, this is the ideal universal Light Controller controller, compatible with a wide input AC voltage range of 100-240VAC / 50HZ 60HZ. Key Features:•Minimum output load: 5W, maximum 500W per channel.•Independent output channels suitable for LEDs or incandescent lamps.•Flexible usage as a 3-channel, 2-channel, or 1-channel controller, depending on your application.•Not suitable for fluorescent bulbs.•Unleash your creativity! This board allows control of almost all AC voltage-operated devices, programmable via a computer. Basic programming skills are required.•The controller features a built-in LED to demonstrate how the Light Controllers will behave. Product Description: User familiarity with basic programming language is essential for optimal use.3CH Light Controller Controller, Arduino-Based: Our programmable Light Controller Controller is the ultimate solution for your signal requirements. It accepts standard 110VAC and 240VAC line voltage, delivering 500 Watts per channel. It's compatible with full-sized LED and incandescent Light Controllers, including household incandescent and LED bulbs. The board incorporates the latest solid-state relays technology, ensuring quiet and efficient switching for years to come.Easy Programming: Programming Light Controller timings is now a breeze with Arduino software. The USB-UART bridge is based on the popular CH340G chip, and the board comes pre-programmed with a simple Light Controller demo code. Additional demo codes are also provided for your convenience. Getting Started: To start working with this board, follow these steps:1.Download and install the CH340G USB driver.2.Download and install Arduino programming software from the Arduino website.3.Connect the device to your computer via a USB cable.4.Upload demo or user-written sketches to the board. Specifications:•PCB board dimensions: 70mm x 100mm•PCB Board Material: 1.6mm FR-4, with solder mask & silk screen.•Supply Voltage: 100VAC to 240VAC (50Hz and 60Hz).•Delay Range: 0 – 255 seconds for each color (RED, YELLOW, and GREEN), mode-dependent.•Input Connector: 14-26AWG, 250VAC @ 16A screw terminals.•Output Connectors: 14-26AWG, 250VAC @ 16A screw terminals.•Safety fuse: 8A.•Unit Weight: 100 grams. Upgrade your management system with our versatile and user-friendly programmable Light Controller controller. Gain precise control over your Light Controllering configurations and unleash your creativity. For further inquiries and support, please contact us through the messaging system. Get started today!

Price: 37.99 USD

Location: Clifton, New Jersey

End Time: 2024-08-30T00:45:37.000Z

Shipping Cost: 0 USD