Description: 2.13inch Touch E-Paper E-Ink Display HAT For Raspberry Pi, 250×122 Pixels, Black / White, SPI Interface2.13" TOUCH E-PAPER HATPartial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like EffectIdeal for price tags, shelf labels, industrial instruments... Size2.13"Resolution250×122Viewing Angle>170°Display ColorBlack and WhiteGrey Scale2Touch TypeCapacitiveTouch Points5-PointsTouch PortI2CTouch PanelToughened GlassCommunicationSPIPower ConsumptionUltra LowDisplay DurationPersists without PowerDisplay PanelE-paperExperiencePaper-likeComfortably ReadingEye Care, No BluelightEnvironmentAmbient Light RequiredDisplay TypePassively ReflectiveRefreshingPartial Refresh SupportFeatures At A Glance2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixelsSupports waken up by user-defined gestureNo backlight, keeps displaying last content for a long time even when power downUltra low power consumption, basically power is only required for refreshingStandard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boardsSPI interface, for connecting with controller boards like Arduino/STM32, etc.Comes with development resources and manual (examples for Raspberry Pi)SpecificationsOPERATING VOLTAGE3.3VGREY SCALE2INTERFACE3-wire SPI, 4-wire SPIPARTIAL REFRESH TIME0.3sOUTLINE DIMENSIONS69.15 × 38.90mmFULL REFRESH TIME2sDISPLAY SIZE48.55 × 23.70mmREFRESH POWER26.4mW(typ.)DOT PITCH0.194 × 0.194mmSTANDBY CURRENT<0.01uA (almost none)RESOLUTION250×122 pixelsVIEWING ANGLE>170°DISPLAY COLORblack, whiteTOUCH POINT5 (max)Advantages Of EINKE-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.Standard Raspberry Pi 40PIN GPIO HeaderCompatible With Raspberry Pi Series BoardsRaspberry Pi in the photo is NOT included.Onboard Control InterfaceI2C For Touch Panel, SPI For DisplayVCC3.3VGNDGNDDINSPI MOSI pinCLKSPI SCK pinCSSPI chip selection, low activeDCData / Command selection (high for data, low for command)ERSTExternal reset, low activeBUSYBusy status output, high activeINTTouch controller interrupt signalSCLTouch controller I2C clock pinSDATouch controller I2C data pinTRSTTouch controller reset, low activeApplication ExampleOutline DimensionsDevelopment Resourceshttps://www.waveshare.com/wiki/2.13inch_Touch_e-Paper_HATPackage contains2.13inch e-Paper HAT x11
Price: 26.99 USD
Location: Shenzhen
End Time: 2024-02-14T08:55:54.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Waveshare
Screen Size: 2.13inch
Model: 2.13inch Touch e-Paper HAT
