Description: Product Description: Dual Function: 1) Charge lithium cells from a 5V power source 2) Protect battery from over-discharge and over-current Charge input: 5V DC • Maximum charge current: 1000mA • Charge cut-off: 4.2V Discharge prote ction cut-off: 2.5V • Over-current protection cut-off: 3A USB-C input • Size: 2.6x1.7cm This is an enhanced USB-powered module for charging rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method. This module provides constant-current/constant-voltage (CC/CV) charging, along with protection against over-voltage, over-discharge, over-current and short circuits to protect the battery and the device that it is powering. The device to be powered by the battery is connected to the module's OUT+ and OUT- connectors and the battery is connected to the B+ and B- connections. When connected to USB power, the module provides up to 1A charge current until the battery is charged, then switches to a constant voltage mode to keep it charged. During use, if the battery voltage drops below about 2.4V, the DW01A protection IC disconnects the battery from the OUT connectors, disabling discharge to protect the battery from running at too low and self-destructing. When the module is then connected to USB power, it will trickle charge the battery to 2.9V (the over-discharge release voltage), at which point the charge current will be linearly increased to 1A maximum and the module will reconnect the battery to the OUT connections, allowing discharge of power from the battery to a connected load. Although the module cuts output power from the battery during an over-discharge situation, it still allows trickle charging of the battery to occur. The module also protects against overcurrent and short-circuit protection - it will cut the output from the battery if the discharge rate exceeds 3A or if a short-circuit condition occurs. This module is perfect for charging single cell 3.7V 1 Ah or higher LiPo cells such as 16550s and 18650s that don't have their own protection circuit. It can charge two cells in parallel, however since the two cells share the charging current, they take twice as long to charge as a single cell. Note: The USB port is for charging only. Package Included: 20x TP4056 5V 1A USB Type-C 18650 Lithium Battery Charging and Protection Board
Price: 11.99 USD
Location: Whippany, New Jersey
End Time: 2024-08-16T01:27:03.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Unbranded
Cut-off Voltage: 4.2V ±1%
Max Charging Current: 1000mA
Type: Lithium Battery Charging Board
USB-C Input Size: 2.6*1.7CM
Over-Discharge Voltage Protection: 2.5V
Current Conversion: DC to DC
Color: Blue
Input Voltage: 5V
MPN: Does Not Apply
Features: Battery Protection
Over-Discharge Current Protection: 3A