2-Bay High Gain FM Dipole Antenna with 300W 1/2 Power Splitter Kit 98~108mhz

Description: Notice: 1. After placing an order, please be sure to pay attention to the information on Ebay, there will be important notices about logistics on Ebay at any time 2. This kit is suitable for 98~103mhz transmitter frequency, if your transmitter frequency is not in this range, please contact customer service DP100 1/2 Wave FM Dipole FM Antenna for the fm transmitter power 0-150w A dipole antenna is a radio antenna that can be made of aluminum, copper, and bronze tube with a center-fed driven element. It consists of two metal conductors of rod, oriented parallel and collinear with each other (in line with each other), with a small space between them. The dipole antenna is a particularly important form of RF antenna which is very widely used for radio transmitting and receiving applications. The dipole is often used on its own as an RF antenna, but it also forms the essential element in many other types of RF antenna. As such it is the possibly the most important form of RF antenna. A half-wave dipole antenna means the length of this dipole antenna is equal to a half-wavelength at the frequency of operation. Why do we recommend this dipole antenna? 1).The half-wave dipole is very clear and easy for frequency adjustation, there are scales on the side bar of the antenna from which you can adjust the frequency from 88~108 by 1mhz stepping. 2).The dipole is a simple antenna to construct and use, and many of the calculations are quite straightforward. 3.)The radiation pattern and high gain of dipole: Radiation pattern of a half-wave dipole antenna,scale is linear. The Gain of a half-wave dipole (same as above). The scale is in dBi (decibels over isotropic). SWR diagram of the half wave dipole at 88Mhz The antenna cable. (we will send cable with BNC connector if no there is no special request. Other option is NJ/TNC connector The antenna cable. (we will send cable with BNC connector if no there is no special request. Other option is NJ/TNC connector) Attention: When setting the antenna, the “Anode” end should be face up, “negetive electrode” should be face down Electrical specification: Frequency range: 88~108 MHz ( 1MHz stepping) Input Impedance Impedance:50 ohm VSWR <1.5 Gain:3.5 dBi Polarization: Verticality Maximum Power Input: 150W Horizontal 3dB Beam Width:360 ° Vertical 3dB Beam Width:73 ° Mechanical Specifications: Height: 990mm Radiating Element Material:Aluminum Alloy Connector:SL16-K Holding Rod Diameter: Φ30~Φ40 mm Package Include: 2* DP-100 Dipole Antenna 1* 300W 1/2 Power Splitter

Price: 349 USD

Location: Canton

End Time: 2024-10-04T14:00:01.000Z

Shipping Cost: 0 USD