Description: Product features: 1. The output voltage is DC 110-2600V. You can turn the voltage adjustment button clockwise to increase the voltage and counterclockwise to decrease it. 2. The output current is 0.25~3.4mAh. You can turn the voltage adjustment button clockwise to increase the current and counterclockwise to decrease the current. 3. When testing MOSFETs, transistors, and Zener diodes, it is recommended to adjust the current to the minimum scale of 0.25mA. When testing the LED backlight board, it is recommended to adjust the current to the maximum scale of 3.4mAh. 4. Portable Size: The small size of this tool is very convenient for daily use, and you can carry it in a tool bag without taking up too much storage space. 5. Equipped with a built-in 600mAh high-capacity lithium battery for power supply, it can be charged in a timely manner through the Type-C interface. 6. Widely applicable: This tool can be widely used for MOS, transistors, IGBTs, diodes, Zener diodes, maximum voltage capacity testing of diode bridges, voltage verification of capacitors and varistors, LED backlighting and lamp board testing, etc Product parameters: Battery capacity: 3.7V 600mAH Charging port: TYPE-C Input: 5V 1A Charging current: Max.550mA Output voltage: 120-2700V Output current: 0.2-3.8mA Applicable components: MOS transistor/IGBT/transistor/diode/electrolytic capacitor/LED/MOV/unidirectional thyristor/rectifier bridge Test objective: breakdown voltage value of electronic components Attention: 1. Do not use it to test high-voltage electrolytic capacitors such as 450V/220UF. It is possible to test low-voltage capacitors such as 2200UF/35V. If there is no output voltage when the red high-voltage start button is pressed, it is likely that the lithium battery voltage is below 3.1V, which cannot power the tester and requires timely charging. 3. Only when testing LEDs and voltage regulators can the output current be adjusted to the maximum value. For testing other components, the output current can be adjusted to the minimum value to avoid damaging the components
Price: 21.9 USD
Location: shenzhen
End Time: 2024-12-13T14:39:47.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Unbranded
MPN: Does not apply
