1550 NM 8-Port Fiber Amplifier EDFA and Optical Wavelength Division Multiplexing

Description: Description 1550 NM 8-Port 22DB Optical Fiber Amplifier EDFA and Optical Wavelength Division Multiplexing Description: - This product is a high stability output HPEDFA. The core device adopts high-reliability Pump laser, and adopts unique APC (automatic power control) and ATC (automatic temperature control) circuits, which make the output power stable and reliable; the unique optical path ensures excellent optical path indicators; high-stability and high-precision MPU (microprocessor) system is easy to adjust, display; reliable and intelligent to use. - HPEDFA boasts low noise, high gain, large bandwidth, high pumping efficiency and stable performance, widely used in CATV systems. Due to the sharp increase of CATV network users, excessive use of EDFA will increase power dissipation power and excessive series connection will cause system C/N degradation. In recent years, a new type of double-clad optical fiber has been developed internationally. The use of cladding pumping technology overcomes the above-mentioned shortcomings of single-clad fibers, increases the output power by 1 to 2 orders of magnitude, and greatly promotes the development of high-power fiber amplifiers. Features: - High quality: The pre-pump adopts 980nm as small signal amplification, and a dedicated pulse width constant temperature cooling chip. The rear stage adopts imported high-power multi-mode pump, the power is precisely controlled by hardware circuit APC, AGC, and dual-pump hot backup design, which minimizes the NF of HP EDFA, which is comparable to conventional EDFA. The system can obtain excellent CNR. - Flexibility: Adjustable range of output optical power (-3 to -6dB), users need to specify when ordering. Multi-port low power, reasonable distribution of output power. The demultiplexer required for 1310/1490/1550nm EPON and GPON can also be integrated inside, which greatly facilitates network applications with EPON. - Intuitiveness: The built-in microprocessor of the machine monitors the working state of the pump laser. At the same time, the panel LCD can display the working parameters. - Network management type: The optional status monitoring transponder is compatible with the SCTE HMS standard, which can realize network management monitoring. - Power plug-in type: The plug-in type switching power supply adopts aluminum profile structure, which is conducive to heat dissipation and replacement. And dual power hot and cold backup. - With EMC, LVD, and CE certification. - Intelligent pump over-temperature protection. When the pump temperature exceeds 50â, the pump is automatically turned off. When the temperature is lower than 50â, the pump will automatically start to work. Parameter: - Wavelength: 1550nm - RF output impedance: 75 ohm - Storage temperature: -40~80â - Input optical power: 0~+10dBm - Output reflection loss: 45dB - Operating temperature: -20~60â - Optical connector type: SC/APC - Power consumption: 1W - Working wavelength range: 1540~1565 Precautions: - Please read the following carefully before installing and using. We are not responsible for any loss caused by breach of safety matters. - The output of the laser and erb-mirror co-doped fiber amplifier is high-power invisible laser radiation. When the equipment is working, please not look directly at the end face of its connector to avoid burning eyes and skin. - The device contains precision optical components, in order to avoid serious impact damage to it, please avoid severe vibration and collision. Fiber pigtails are easy to break, please handle with care. - The device contains electrostatic sensitive devices, please handle with care, and ensure that the grounding is good and the power supply is normal. Special Precautions for Fiber End Face: - Be sure to keep the end faces of the input and output pigtails clean before use. When there is dirt on the output end face, it is easy to burn the end face of the output pigtail and reduce the output power. When cleaning the fiber end face or inserting optical jumpers, please turn off the input light first. - The correct order of plugging and unplugging the optical port is: Plug: first insert the optical jumper of the output port and then insert the optical jumper of the port; Unplug: first unplug the optical jumper of the input port, and then unplug the optical jumper of the output port. - The HPEDFA is a product with high precision and high stability. In order to make the output power have high stability, please use the optical jumper with good quality and the interface matching with the device to connect the output port. In principle, the shorter the jumper, the better. Please not let the jumper move freely. Package Included: - 1 x Optical Fiber Amplifier Payment Terms 1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc. 2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. Shipping Terms 1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email. 2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding. Return Terms If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund. Custom Duties & Taxes 1. It is buyers responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers. 2. Please check with your countrys customs office and inform us what/how much should declare before shipping. Feedback 1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap. 2. If you are dissatisfied for any reason, please dont be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.

Price: 855 USD

Location: Shenzhen

End Time: 2024-12-17T08:05:54.000Z

Shipping Cost: 0 USD