Description: Due to EBAY policy changes, I will be shipping once payment clears. DUMP CONTROLLERS – EVOLVED LCD UNIVERSAL RELAY DIVERSION CHARGE CONTROLLER MODEL 2URDC-1224-B 12V & 24V (Board Version 2.0.X) For both EMR’s (ElectroMechanical Relays) and SSR’s (Solid State Relays) 2-STAGE charging using SSR'S For Wind, Solar and Hydro International First Class Mail only: If you don't receive your item within 3 to 4 weeks please contact your postal service with the tracking/customs info. It is out of my hands once a First Class Package leaves the US. Also, it can be extremely slow to some countries (Russia, Italy, Mexico, Philippines, S. Africa, Greece, etc). With possible delays of 2 to 3 months or more. DESCRIPTION The Universal Relay Diversion Controllers/Regulators are low cost, Microprocessor controlled Diversion/Dump type controllers designed for the System Designer or DIY (Do It Yourselfer). It is designed to switch up to 8 conventional automotive style electromechanical relays (EMR) directly with up to 1.25A @ 40C total coil current draw with up to 320A power handling capability. Also unlike other controllers of this type of design, it will also control DC-DC Solid State Relays (SSR) in Legacy/Conventional (Dump) diversion mode or use a much more efficient 2-Stage charge algorithm. It is theoretically able to directly switch up to 50 SSR's at 25ma each (untested). If using just 40 amp SSR's that adds up to a potential 2000A (4000A using 80 amp SSR's) power handling capability. To keep cost down, this controller was designed for the System Designer or DIY (Do It Yourselfer) and is the BOARD ONLY and does not include an enclosure. It can be mounted directly on a wall in an area protected from the environment or in an Optional or user supplied enclosure. Please Download and read the Manual before purchasing http://windandsunpower.com/Download/2URDC_1224_B_V2_0_Manual.pdf FEATURES The ability to Directly Switch up to 8 Electromechanical or 50+ DC-DC Solid State Relays Legacy Dump/Diversion/On-Off (Electromechanical or Solid State Relays) 2-Stage – Dump/Diversion (using 10ms on – 10ms off or faster SSR's Only!) Manual Equalization Mode (using 10ms on – 10ms off or faster SSR's Only!) Normally Open Output (EMR's and SSR's) Normally Closed Output (For Special Applications with SSR's Only!) 12V Adjustable Dump/Diversion/On-Off Set-point (13 to 15 Volts in 0.05V increments) 12V Adjustable Equalization Voltage Set-point (14 to 15.75 Volts using SSR's Only)! 24V Adjustable Dump/Diversion/On-Off Set-point (26 to 30 Volts in 0.05V increments) 24V Adjustable Equalization Voltage Set-point (28 to 31.5 Volts using SSR's Only!) Extremely Low Power Consumption (≤ 25ma) Battery Gauge-divided in 10% increments (based on Trojan Batteries FLA SOC chart) Accurate Battery Volt Meter and Tracking (±0.2%) Switching Speeds Up To 50 On-Off Cycles Per Second When Using SSR's (≤50Hz) 8-Bit Microcontroller running at 32Mhz Latest SMT (Surface Mount Technology) for Compact Size and Improved Performance Self Resetting Fuse Relay Powered/Active LED Indicators Test/Equalization Button Alarms to help diagnose system problems Reverse Polarity Protection Over Voltage Protection Over Current Protection Transient/Lightning/Surge Protection SPECIFICATIONS Min. Operating Volts 7 VDC Max. Operating Volts 32VDC Nominal Operation Voltage 12VDC or 24VDC Volts Max. 35VDC Max. Power Used by Controller ≤ 26ma LCD On ≤ 20ma LCD Off Power Sunk @ Ambient Temp. -1.25A Max. @ 40C -1.00A Max. @ 60C 12V Dump Voltage Adjustment Range 13.0 to 15.0 Volts in 0.05V increments 12V Equalization Voltage Adj. Range 14.00 to 15.75 Volts in 0.05V increments 24V Dump Voltage Adjustment Range 26.0 to 30.0 Volts in 0.05V increments 24V Equalization Voltage Adj. Range 28.00 to 31.5 Volts in 0.05V increments Relay Connectors Output Voltage = Battery Voltage Battery SOC Meter/Gauge 10% Increments Battery Voltage Regulation (High/Low Volts Using EMR's) ± 6% ± 0.93V (This specification can fluctuate widely due to system variables and design) Battery Voltage Regulation (High/Low Volts Using SSR's) <±0.2% or <±0.07V or less Typical @ 23C (This specification can fluctuate due to system variables and design) LCD Accuracy Battery Voltage <±0.2% or <±0.07V or less Typical @ 23C Internal Battery Voltage Tracking <±0.2% or <±0.07V or less Typical @ 23C Automotive style ElectroMechanical Relays 1 up to 8 30 to 40 Amp with 12/24VDC 160ma coil Solid State Relays 2-Stage & Equal DC-DC 1 to 50? ≤10ms On or less ≤10ms Off or less EMR Operating Frequency Dump Volt Setting Min. 5 Sec. On Min. 0.1 Sec. Off SSR Operating Freq. 2-Stage Min. 0.01 Sec. On Min. 0.01 Sec. Off ≤50Hz(On+Off 50 x Sec.) Operating Temp. Storage Temp. -20°C to 60°C -50°C to 150°C Dimensions 100 mm x 50 mm (3.93 in. x 1.96 in.) Specifications subject to change without notice. Made in USA-Components Made in Rest of World WARRANTY: WindAndSunPower. Model 2URDC-1224-B is warranted to be free of defects in material and workmanship for three years from the date of purchase. Failure to provide correct installation, operation or care for this product, in accordance with the instruction manual, will void the warranty. Product liability shall be limited to repair or replacement at the discretion of the manufacturer. The manufacturer is not responsible for the labor or other charges necessitated by the removal, transportation, or re-installation of any defective product. Warranty does not cover damage due to, mishandling, abusive conditions, lightning or exposure to weather. No specific claim of merchantability shall be assumed or implied beyond what is printed in this manual. No liability shall exist from circumstances arising from the inability to use this product, or it’s inappropriateness for any specific purpose. In all cases it shall be the responsibility of the customer to insure a safe installation in compliance with local, state and national electrical codes. COPYRIGHT© 2010-2014 Jeff Mason WindAndSunPower. All Rights Reserved Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
Price: 59.99 USD
Location: Alton, Illinois
End Time: 2024-02-19T14:58:12.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Current Output: 1A Max
Power Source: Wind
Country of Manufacture: United States
MPN: 2URDC-1224-B
Brand: WindAndSunPower.com
Type: Diversion/Dump Charge Controller
Current Type: DC
Voltage Input: 12V/24V
Voltage Output: 12V/24V
Voltage: 12V/24V
Model: 2URDC-1224-B
Recommended Environment: Indoor
Features: LCD Display
Country/Region of Manufacture: United States
Available Variations
Color: Green BL
Price: 59.99 USD
Available Quantity: 165
Quantity Sold: 164