1/2'' Automatic Water Level Control Valve Auto Shut off Ball Mini Float Valve304

Description: 【Auto function】MEUPMEOP the float valve automatically refills water for your water tank,water tower,livestock,animal water drinker when water drops below the valve level. Once it reaches the valve, it would automatically stop refilling water,so it will shut-off when the water reaches the internal float.【Easy to install】It's a mini float valve,MEUPMEOP branded ball size is small,so easy to install,the male thread is 1/2", we used BSP pipe thread,also the male thread is longer,it's perfectly to fit most of BSP thread connections. If your pipe thread is NPT,you just need to add a few PTFE TAPES on the male thread,then it works perfectly as well.【No electricity needed】A ball float valve inside allows water to flow until a specific level is reached. Once the water reaches this level, the float valve will be pushed up with water due to buoyancy and stop the flow of water. When the water level starts dropping, the valve will open again, and the water will start to flow again,so no need electricity.【Widely used】It's used for people to maintain the water level in a garden waterfall, on a yard fountain,for a rain gutter garden project,using it to make an automatic shut-off for swimming pools,for chicken coops,for automatic chicken water drinker,for cattle watering drought,for rain collection barrels in the outdoors etc.【Working Water Pressure】The float valve works with 10psi to 150 psi water pressure,if water pressure is too low or too large,the float valve will not suitable for using, it will not work or be damaged. Working Temperature: 0°C~100°C.【Easy maintenance】The float valve comes with filter,the filter must be used in the water inlet,avoid sand and stone blocking the floating ball.【Safety and environmental protection】We used stainless steel as the valve body, used stainless steel screw, never rust,very safe.【Kindly note】If you are using an automatic fill float of any kind indoors, please make sure you have an emergency overflow system in place. Auto fill floats of any kind can eventually malfunction and cause flooding. It's always best to set the lowest flow of water needed to maintain a full water level. Product Description 304 Stainless Steel Water Level Control Float Valve Water level control valve is a replacement for the old float valve. When the water level rises to the valve level,the water flow will automatically stop. When the water is below the valve level,the water will flow automatically to refill the water inside the water tank. Where does it use for ? Use for water tower Use for water tank Use for swimming pool Use for air cooler Upgraded Auto 304 SS Water Control Level Float Valve Auto function The float valve automatically refills water for your water tank,water tower,livestock,animal water drinker when water drops below the valve level. Once it reaches the valve, it would automatically stop refilling water,so it will shut-off when the water reaches the internal float. No electricity needed A ball float valve inside allows water to flow until a specific level is reached. Once the water reaches this level, the float valve will be pushed up with water due to buoyancy and stop the flow of water. When the water level starts dropping, the valve will open again, and the water will start to flow again,so no need electricity. Widely used It's used for people to maintain the water level in a garden waterfall, on a yard fountain,for a rain gutter garden project,using it to make an automatic shut-off for swimming pools,for chicken coops,for air cooler,for automatic chicken water drinker,for cattle watering drought,for rain collection barrels in the outdoors etc.Keep your tank water topped off. Advantages Does not require electricity to operate Small size compared to the old float valve Ease of installation and maintenance lt has a long life span of up to five years Works under water pressure up to10 bar Valve design gives it the ability to be widely used Auto fill and shut off water It come with filter to seize impurities Product Name Automatic Water Level Control Float Valve Material 304 Stainless Steel Color Silvery Product Weight 5.5 ounces Male Thread Size 1/2" Working Pressure 10 to 150 psi Applicable Temperature 0-100 °C & 0-210 °F Medium Clear water Flow Rating 30L/Min Use for Water tower, pool, water tank, water storage, solar water tank, kitchen sink,aquarium. Product Instructions: Applicable water pressure range: Min 0.2 Max 10KG (please use it under reasonable conditions)The product must be installed vertically on the horizontal plane, and the float valve must be downward during installationPlease fix the water pipe on the horizontal plane first, and then install the product on the water inlet pipeWhen in use, the stop valve of this valve must be fully openedIf two ball valves are installed in a pool, they should be kept at the same levelBefore installation, please clean the impurities in the pipe to avoid impurities blocking the ball valve. Wild Application Water Tower Swimming Pool Water Storage

Price: 29.18 USD

Location: Denver, Colorado

End Time: 2024-11-15T21:45:25.000Z

Shipping Cost: 0 USD