0.96" yellow color I2C IIC 128X64 LED OLED LCD Display Arduino ssd1306 SSD1315

Description: Size: 0.96 Resolution: 128X64 Viewing angle: greater than 160 degrees Supported platforms: for Arduino, 51 series, MSP430 series, STIM32 / 2, SCR chips Low power consumption: 0.04W during normal operation Support wide voltage: 3.3V-5V DC Working temperature: -30-80 degrees Panel Dimensions: 26.70* 19.26* 1.85mm/1.03*0.76*0.07 inch(approx) Active Area: 21.74* 11.2mm /0.86*0.44 inch(approx) Driver IC: SSD1306/SSD1315 Communication: IIC, only two I / O ports Backlight: OLED self light, no backlight Interface: GND: Ground VDD: 3.3-5V SCK: Serial Clock SDA: Serial Data Driver IC: SSD1306/SSD1315 What is OLED ? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. The use of OLED technology offers the following advantages for flat-panel displays ? 1. A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below) 2. Self-emitting light, in contrast to the required backlight for TFT-LCD 3. High luminosity 4. Lightweight and thin (less than 2 mm) 5. Low operating voltage and power consumption 6. Wide range of operating temperatures (-40℃ to 85℃) A Comparison of OLED and TFT-LCD Display Technologies How Does OLED Emit Light ? OLED"s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components. Package included: 1 x 0.96" yellow color I2C IIC 128X64 LED OLED LCD Display Module Arduino SSD1306 SSD1315 Instructions/schematic are NOT included. We don't provide technical assistance please make sure that you are familiar with the product before purchasing.

Price: 4.89 USD

Location: Villa Park, Illinois

End Time: 2024-01-05T01:04:22.000Z

Shipping Cost: N/A USD